Log in

ISM Article

Is Your Service Team Prepared for MPS?

28 Apr, 2011 By: Ken Staubitz, Strategy Development, Inc. imageSource

Is Your Service Team Prepared for MPS?

It is no secret that most office equipment dealers have experienced a decline
in service margin and aftermarket revenue relying on office equipment sales
alone.  However, the most successful organizations have incorporated an MPS
strategy to help carry the baton over the finish line of increased service
margin and revenue growth.

A good example today is the Ohio-based dealership Modern Office Methods,
which monitored 400 printers 18 months ago and today monitors over 9,000
printers producing over 11 million monthly clicks, and has attributed their
phenomenal MPS growth to a few basic principles.  

“The basics of an MPS service strategy are very simple.  A dealer must
overcome the fear of something new. They must have a plan of execution in order
to provide a profitable solution to their clients’ printing needs, and the
dealer must be positioned to address client concerns in a timely way,” explains
Rod Randall, Vice President of Strategic Accounts at MOM.

 The truth is that the client wants a product that meets their needs
financially and operationally; when an issue presents itself, the client trusts
that their business partner (the dealer) is going to take care of their
situation timely and effectively.  These concepts are the underlying principles
to keep in mind when taking on MPS business. 

From a service perspective, a dealer must develop a plan of attack for needed
resources and support.  As a dealer, ask yourself if you are truly able to
successfully support the printers in your MIF (machines in field).  Be honest
because if you are not confident that you can support your current units, then
how can you be certain you can support various models and manufacturers as they
populate your fleet? Analyze your current MIF to see what printer makes and
models you are successfully supporting. Next, map out where these units are
located.  Are they spread throughout your territory or are they in a
concentrated area?  Would it make sense for you to focus your sales efforts to a
geography that you can support successfully until the service team is able to
support a wide scale sales effort? Without question, you must remember that this
situation varies among dealers but is key to effectively supporting a new
initiative. In order to be a major player today, a dealer should be able to
support HP and/or Lexmark, simply because these two manufacturers make up the
majority of market share.  Not to infer that only HP and Lexmark make the best
products, but the odds of your potential clients having one of these two brands
is significant. Assuming your dealership supports another one of the major
manufacturers of office products, i.e. Konica Minolta, Ricoh, Kyocera, Sharp,
Toshiba, etc., does it make sense for your dealership to service and market
these other products to some degree also? 

Service Support

After understanding the products you are going to support, explore your
service team’s competence in fixing these products. Do you know what training is
available from the manufacturer or by a third party provider?  It is critical
that the service team has the competence to perform firmware updates and driver
downloads while at a customer’s site in order to fix the issue on the first
call.  The service team must be confident in a supplier’s technical support
should they face an unforeseen technical issue. For most manufacturers, printer
training is computer based.  However, many fantastic third party resources for
parts, supplies and training exist.  There are many reputable support companies; these company’s parts and supplies are key to keeping your parts and supply costs to a minimum. 

Data collection methods are critical in order to reduce valuable manpower
expense in collecting meter reads, examining toner levels for supply
fulfillment, and to head off service issues that could be eliminated over the
phone.  There are many products, i.e. Print Audit and PrintFleet that provide
such data collection, but do your homework to find the best fit for your
organization.  After you have chosen a method, next determine what data you
actually want to collect. 

Give this some real consideration. For example, do you only want to get meter
reads or would it make sense for your organization to be notified when a toner
level is getting low so that you can arrange a supply shipment before the client
gets involved?  Once the organization has refined the information collected, a
firm process must be established for handling this info. Do you have an existing
call center that can monitor the information being sent, or is your organization
big enough to handle a full time person monitoring and disseminating the
information?  Either solution can work as long as the process is thorough and

Action Plan

Once your product focus has been established, the service team is trained,
the service and supply data is funneling in, there is not much more to do then
to collect the revenue, right?  If only it were that easy.  Does your service
organization have a plan in place should a service issue arise that your team
cannot resolve?  A backup plan must be in place should your service team not be
able to fix a printer. At times it is comical to hear organizations squabble on
what to do when this scenario arises. Should the traditional delivery team,
typically the company box truck, be deployed to swap the unit out? 

Or perhaps the customer should wait until a factory printer representative
can arrive on the scene to fix the issue…these are typical responses. After the
product is removed then your dealership can decide to pull in resources to fix
the unit or permanently swap it out.  The bottom line is, when this situation
arises that product should be removed as quickly as possible with a like, or
similar functioning product immediately. It does not matter to the client what
you do with it, to them they are paying for a service to resolve their issues in
a timely manner.  If your dealership cannot respond, then the customer will find
someone who can, it is that simple.  Having a replacement pool or loaner fleet
is the best way to prepare for such an event. This way they are ready at a
moment’s notice and the service team can fix the client’s unit once it is
brought into your office.

These are some of the scenarios that can happen, and of course, a single
article here does not fully define every situation you will encounter from a
service perspective when entering the MPS space, but it’s a good reminder to
start deploying better methods for improving your service operations overall.

Ken Staubitz is a service consultant with Strategy Development, with 14+
years experience in all levels of service operations and MPS service structure. Formerly with Modern
Office Methods (MOM) in various service and operational roles; was MOM’s Director of Client Services where he oversaw all service
operations & managed a staff of 60+ field service personnel. Ken served on the
Lanier Dealer Advisory Council & was an E-Automate Service Committee member. At

WebinarCase Studies and White PapersSand Exchange Blog

imageSource Magazine Quick Links
Upcoming Events
ITEX Expo & Conference
©2015 Questex, LLC. All rights reserved
Reproduction in whole or part is prohibited
Please send any technical comments or questions to our webmaster