Log in

ISM News

Metrofuser Develops Fix for HP 4200 Fuser Film Factory Defect

28 Sep, 2005

Metrofuser Develops Fix for HP 4200 Fuser Film Factory Defect

Printer Parts remanufacturer Metrofuser has announced a solution to a notorious defect than has plagued the imaging industry.

After months of research and development, Metrofuser has developed an engineering upgrade that has corrected the film delaminating on the HP 4200 Fusing Assembly. The proprietary upgrade has been implemented in the production of the fuser and has resulted in a 98% reduction in film failures. Service companies and resellers now have access to a low cost, quality fuser that will not let them down or their customers down.

The Delaminated Fuser

Users of certain HP LaserJet 4200 series printers have experienced printing problems caused by delaminated or torn film on the product’s fuser and occurring long before the end of the fuser’s 200,000-page life. The delaminating causes a catastrophic image defect and has shortened the life of the fuser considerably.

Collectively this problem is estimated to cost service companies hundreds of thousands of dollars nationwide in repeat service calls. HP has published service notes on this issue dating back to March 2004. The problem is so wide spread HP has developed a revised model fusing assembly.

To find out more visit http://www.metrofuser.com

WebinarCase Studies and White PapersSand Exchange Blog

imageSource Magazine Quick Links
Upcoming Events
ITEX Expo & Conference
©2015 Questex, LLC. All rights reserved
Reproduction in whole or part is prohibited
Please send any technical comments or questions to our webmaster