Log in

ISM News

New Digital Toners for use in Kyocera Mita

8 Feb, 2005

New Digital Toners for use in Kyocera Mita

Polek & Polek is offering a range of new compatible toners for use in the following Kyocera Mita digital copier models:

AI 2310/3010

AI 4040/5050

AI 5555/6060

KM 1510/1810

KM 1530/2030

KM 4230/5230

KM 4530/5530/6330

KM 6230

Fully tested for quality and yield, these new toners offer 100% guarantee to gather or go beyond the OEM qualifications. They will help copier dealers decrease their Cost Per Copy costs and increase their profit margins. Most of these toners are also available for Copystar and Royal Copystar packaging. Developers are also available for most models.

For more information on their product line, please call your account representative at 1.800.526.1360 or visit their website at www.polek.com.

Polek & Polek offers new TYPE 5110 Fax Cartridges and new PM Kits for use in Ricoh Aficio

Aiming to give dealers the newest products in the industry, Polek & Polek announces the release of the new Type 5110 toner cartridge for use in Ricoh Aficio fax machines. This new cartridge has been tested and offers 100% guarantee. It comes as a new, profitable alternative to the OEM equivalents as it enables dealers to offer substantial savings to their customers.

Adding in to their compatible Ricoh line, Polek & Polek has also recently released two new PM kits for use in the Ricoh Aficio 350/450 and 1035/1045 copier machines. They provide all the necessary parts for a technician to complete a 150,000 copy PM on these machines. Their components are as follows. The 350/450 PM Kit contains 1 upper fuser roller, 1 lower fuser roller, 1 charge roller, 1 cleaning blade, 1 cleaning pad, 1 transfer belt, 1 transfer belt blade, and 2 pick off fingers. The 1035/1045 PM Kit is compounded by 1 cleaning blade assembly, 1 transfer belt cleaning blade, 1 transfer belt, 1 development filter, 10 pick off pawls, 1 charge roller, 1 upper fuser roller, 1 lower fuser roller, 1 hot roller stripper, 1 thermistor-center, and 1 thermistor-rear.

“These complete kits help dealers by eliminating extra part numbers and by making sure technicians have all the parts that they need”, said Rob DiCerbo, of the new product development team. Polek & Polek also carries the parts individually as well as the toner and developer for the same machines.

WebinarCase Studies and White PapersSand Exchange Blog

imageSource Magazine Quick Links
Upcoming Events
ITEX Expo & Conference
©2015 Questex, LLC. All rights reserved
Reproduction in whole or part is prohibited
Please send any technical comments or questions to our webmaster